Welcome ACMAN factory,come to understand our strength.
Dust Extraction Systems for Air Pollution Control
Healthy Manufacture
Home / All / Pleated Dust Filters/Air Filters /

Sintered Porous Plastic Filter, PE Pleated Cartridge Filter for Dust Collection and Powder Feeding

Sintered Porous Plastic Filter, PE Pleated Cartridge Filter for Dust Collection and Powder Feeding

Sintered Porous Plastic Filter, PE Pleated Cartridge Filter for Dust Collection and Powder Feeding
Sintered Porous Plastic Filter, PE Pleated Cartridge Filter for Dust Collection and Powder FeedingSintered Porous Plastic Filter, PE Pleated Cartridge Filter for Dust Collection and Powder Feeding
CategoriesPleated Dust Filters/Air Filters
BrandACMAN
ModelLT-1500
FOB portSHANGHAI/NINGBO
Terms of PaymentT/T
Update TimeOct 14,2024
Detail Information
Sintered Porous Plastic Filter, PE Pleated Cartridge Filter for Dust Collection and Powder Feeding
UHMW-PE Sinter-plate filter advantages

Sinter-plate filter advantage:

l  Filter element lifetime of up to 15 years possible

l  Low maintenance costs due to long useful life of the filter elements

l  Constant pressure drop guarantees consistent air flow

l  High separation efficiency due to surface filtration 

l  Clean gas emissions <1.0 mg/m3

l  Compact rigid body generates a robust filter design

l  Filter medium: capable to be washed, recycled and refurbished

l  Universal mounting from the raw- or clean gas side of the filter unit

l  Filter medium absolutely free of fibers, ideal for product recovery

l  Excellent use for highly abrasive dusts

l  Antistatic version of the filter elements available

l  FDA-conformity by using food-grade filter material

Surface filtration vs  Deep filtration
Bag filters/cartridge pleated filters
-deep filtration 
Traditional filters like bag filter and cartridge filter have high efficiency when the surface dust accumulated, when the pulse-jet working the efficiency will drop, so the pressure is not stable, in some special conditions, it is not suitable.
sinter-plate filters
-surface filtration
The sinter plate filter have a PTFE coating on the PE basis, so do not need dust cake to block the other dusts.
when the pulse-jet working, the efficiency will not influenced by the original conditions.
it is called surface filtration.
Filter anatomical structure/working principle
Big filtration area
The pleated design of the sinter-plate filter have big filtration area. 
so the dust collector could design small and that could save lots of space for the company. also, the rigid structure making all the folding area effective.
Sinter-plate inside view

UHMWPE base material: 30um@4mm thick;

PTFE coating:  2-3um@5um thick.
Installation
Top Load Filter Installation:
Replace dust collector filters has a high cost for most big factories. Many companies need to hire outside contractors due to the manpower required. also should consider the safety conditions. In addition, traditional cage+filter bag replace is a sophisticated work, the cage is heavy and the dust house is abominable. Also,Changing bag filters also leads to system shutdowns and system downtime that costs much in lost production.
One of the big cost saving benefits of pleated filter elements is the ease of replacing them compared to traditional filter bags and cages. With traditional bags 
and cages, much effort is needed to remove the cage and bag assembly from the baghouse, and then replace the long cumbersome assembly back into the baghouse, and down into the tubesheet hole. With pleated elements all of this is eliminated. Compared to the complicated bag and cage assembly, the one-piece element is easy to handle and takes approximately 50% of the time to change compared to a traditional filter bag. Additionally, if the total number of filters has been reduced  then less filters will need to be changed in total.

Place the snapband cuff into the tubesheet hole with tail portion of the snapband cuff pointing down into the tubesheet hole.

Lower the pleated filter element straight down (plumb) through the tubesheet gasket.

Once the filter is lowered all the way into the tubesheet gasket, the final sealing of the filter into the gasket will require slow, firm pressure to seat the stepped top down into the snapband cuff.
Model
Filter Area
Tubesheet Size
Length
Sinplit162-1500
2.03m2
Φ162mm
1466
Sinplit162-750
1.00m2
Φ162mm
716
Sinplit162-500
0.66m2
Φ162mm
466
Sinplit133-1500
1.62m2
Φ133mm
1466
Sinplit133-750
0.80m2
Φ133mm
716
Sinplit133-500
0.53m2
Φ133mm
466
Sinplit125-1500
1.49m2
Φ125mm
1466
Sinplit125-750
0.73m2
Φ125mm
716
Sinplit125-500
0.48m2
Φ125mm
466
Please send your message to us
*Email
Tel
*Title
*Content
Upload
  • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.
subscription
KEEP IN TOUCH
Please send your message to us
*Email
Tel
*Title
*Content
Upload
  • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.